i played a bit with corel painter 2018, maybe for a hour and this is what i've found sofar:
pro:-didn't manage to crash the program to desktop by playing a minute with the selection lasso. painter 10 was very prone to that.-undo (control+z) finally seems to correctly update your image, in Painter 10 it occasionally undid your previous stroke but didn't update the canvas.con:-still unstable-color triangle lags behind cursor if a brush from the thick paint category is selected.-maximising painters window leaves a 1 pixel border on bottom and right side of the screen.-zooming sometimes leaves a horizontal line artifact behind when "area-averaging" is enabled. if you make a brush stroke thru the line it disappears in that location (similar asundone brush strokes would behave in painter 10 when the canvas didn't update). turning "area-averaging" off renders most zoom levels super jagged.-zoom tool doesn't update the current zoom % value until you reach 200% zoom. select zoom tool and enter a value, for example 25% and enter. next left click with the zoom tool on the canvasto zoom - notice you are zooming in but the value doesn't update until you zoomed 200% in, also if you type in a value then zoom in 1-2 times and retype the previous value it will not adjustthe zoom at all. can also occur while zooming out, only seems to update on 200 and 400 zoom.-the search feature doesn't find ANYTHING, not even if you type the exact name of your currently selected brush.-wet grainy brush starts lagging after a stroke is done. make a stroke and when you release left click or lift the tablet pen and move the cursor you can watch it lag and stutter quite drastically.the duration of the stutter seems dependent on the stroke length but even a short one will have 1-2 seconds of stutter.-experienced random twirls with a certain pallate knife if i change angle to rotation and use the wacom artpen.-advertisements for new overpriced brush packs tied into the program.
i didn't try hard to find bugs but they are very common in corel painter 2018 - or most likely any corel painter version.
- very inconsistent and cluttered User Interface (UI).
the "advanced bursh controls" icon highlights blue when activated the others stay black.
"blending panel" icon is colored, the others are black.
"dab profile" window has different background color then the rest and no header.
some windows like "general brush controls" gets header with title the rest just a black header without title.
"advanced brush controls" window gets a blue border while all the others get a black one.
multiple entries for the same control options in different control windows, for instance "size" window in both "advanced brush controls" and "general brush controls".
option windows extent far beyond the screen instead of implementing a scroll bar.
its like multiple people were working on the same UI while no one knew what the other was doing.
Maybe it's because I'm used to it after using it for so long, but I think this is actually an improvement over how it used to be a couple versions ago.Basically, you have a few hierarchies. You have those fly-out panels (the light gray), which are attached to the brush control bar at the top of the screen. They are the main settings you will commonly be adjusting for each brush, placed there to make them easy to access. They also give you shortcuts to the more in-depth brush control palettes.The darker gray panels are the various brush control palettes. These are *numerous* and except for people who are really knowledgeable of Painter's brush engines, I would recommend staying away from those for the most part (with the exception of accessing them through the Advanced Brush Controls option--I'll explain below).The 'header with title' is a grouping of palettes. These are actually a nice addition because you can take any brush control palettes you want and group them together that way. You can also collapse them by double clicking the heading bar, which was something Painter needed for a *long* time. That little gear icon at the top-right lets you 'dissolve' the grouping of palettes (they call it a Palette Drawer). The one thing REALLY lacking that has been requested numerous times though is the ability to lock the palette arrangements. I constantly accidentally move them around with my stylus and they are difficult to re-group even using a mouse.Lastly, the 'Advanced Brush Controls'. I think it was highlighted blue just to make it stand out when you opened it, and it's a bit of a special case because it dynamically updates. That grouping of palettes is your friend. The reason is, if you open it for a particular brush, all of the brush control palettes that have any control over your current brush are grouped together there. This prevents you from having to guess and open a zillion different palettes trying to find the functions that change your brush behavior. If it's a setting that works with your currently chosen brush, it'll appear in there. If it's one of the palettes that does nothing at all with your current brush, it won't show there. And, if you change your brush type entirely (e.g. from an Artist's Oils brush to a Real Watercolor brush), the Advanced Brush Controls auto-updates with again the relevant palettes for your chosen brush type. This is very helpful and was a great change they made to try to de-mystify the numerous brush types a bit.I'm with you on Painter having numerous bugs, but some of these things I think are actually improvements compared to previous versions.
You're not going to find any disagreement here. I have Verve as well, and I have donated to Taron for its development. It's an amazing piece of software, and I have completed several paintings in it. I would use it exclusively if it were as fully-featured as Painter, but there are still certain limitations with it that prevent me from using it as my primary app.Again, I don't want this to sound like I'm trying to defend Painter, but its new thick paint tools actually can look incredibly realistic. The problem is, all of the default brushes that come with it are crap. Really. Many of their 'brush technologies' can look pretty good, but their default setups (right down to the blank white non-textured canvas) look pretty bad.Here is a more fair comparison (well, maybe not really 'fair', because the stock brushes that come with Painter will *not* look like this):
I should add, the default lighting settings for the canvas in Painter are also crap. If you know what you are doing though, and set up a proper multi-point lighting like you would use for photographing a painting, it can also look really good. In fact I think its old clunky lighting engine can look even better than ArtRage and maybe even Verve (because you can have multiple light sources at varying angles), but only if you know how to set it up and adjust it properly. Stock-for-stock without adjustments, ArtRage and Verve look much better in terms of lighting.
is effects -> surface control -> apply lighting the only control to adjust the canvas lighting? i haven't found any other and it only seems to work like a effect. if i change the settings and make a new stroke afterwards it looks like its not affected by the lighting adjustments at all.
your custom thick paint brushes look indeed a lot better then what you get by default. i also like how verve blends tho, you still can have the smooth blending painter does but you can also achieve a rougher more scattered blend if you only do a couple of light strokes.
No, 'apply lighting' is sort of a post-processing effect which you can apply, but it isn't a real-time lighting effect.What you're looking for is under Canvas > Surface Lighting. You also need to check the box that says 'Enable Impasto' for the dynamic lighting to work (with the exception of the 'Thick Paint Shadows' which I recommend setting to a very low value, e.g. 2% or so, and the ambient lighting).Also, another thing you're going to hate: there are now two types of 'depth' in Painter: the thick paint, which has its own depth effects which can be adjusted by double-clicking the thick paint layers and moving the slider; and also any brush that has 'Impasto' turned on, which is in one of the brush control palettes.In my screenshot above, both types of depth are active. The canvas texture is using the 'impasto' depth while the paint itself is from the 'thick paint' depth. They interact with each other, but they aren't quite the same thing.
i noticed they implemented impasto to the regular layers, back in painter X impasto had its own layers just like thick paint in 2018.
thanks for the heads up on the surface lighting, i'll check it out!
you're thinking of something else producing extra layers (either liquid ink, or watercolor brushes), impasto has never required specialized layers like thick paint does.